Our new patented Flexo Mounting System has been created to attractively terminate applications with a secure mountable
end. This new Mounting System is engineered to work with Flexo PET 1 1/2” & 1 3/4”, and with Flexo Clean Cut 1 1/2”.
The installer friendly part clamps securely onto the sleeve without attaching to your wiring for ideal strain relief. The two piece
construction removes any limitations in size created by large connectors and preserves the sleeving’s expandability.
Automotive
grade glass filled nylon construction is suitable for a variety of applications.
Before
After
A few minutes of time for installation, without any specialized tools, results in a strong, neat and long lasting assembly that completely hides the wire bundle and allows free access to the bundle for removal or addition of additional wires.
At the heart of the Flexo Mounting System is the specially engineered Locking Collar, which when used in conjunction with the
Metal
Retaining Ring,securely holds the sleeve without constricting the cable bundle.
Flexo Mounting System wall plates are available in Black, White and Beige to match any decor. All hidden parts are Black only.
Single Locking Collar Set
FMS1.50FL
5 Pack Locking Collar Set
FMS1.50FL5
Wall Plate Only (includes 2 color matched screws)
FMP1.50PLATE
Finishing Pack: 1 Locking Collar Set & 1 Wall Plate
FMS1.50FK
Installation Instructions
Step 1
Install the sleeving over your wire
bundle. Try to closely match the
sleeving diameter to your bundle
diameter so the bundle is fairly
tightly managed. Leave about 2”
of additional length to put through
to the other side of the finished
assembly.
Step 2
Open the metal retaining ring and
slide it over your bundle. Install
the ring INSIDE of the sleeving
so that the registration teeth protrude
through the sleeving.
Step 3
Take one of the locking collar
halves (it doesn't matter which one... they're identical) and place it over the teeth
on the retaining ring. It is important
that the teeth of the retaining
ring protrude into the appropriate
holes in the locking collar. Hold it
in place while you align the other
half of the locking collar to the
locking tabs on the ends of both
halves. Squeeze the 2 halves together
until both ends snap and
lock together.
Step 4
Smooth out the sleeving to allow
the wall plate to easily slide up
the length of the cable bundle.
Slide the wall plate onto the assembly
so that the side that faces
the wall is against the locking collar.
Snap the locking collar over
the registration pins on the inside
of the wall plate.
Screw the wall plate into the
workbox with the included color
matched screws.
How To Install the Flexo Mounting System
Download this instruction sheet to learn how to install the Flexo Mounting System and create a secure and attractively managed through-wall cable bundle.
Just click on the thumbnail to open the .pdf instruction sheet.
